4. ASSEMBLY OF LAST CORNER (This step is for a 4-sided sukkah only.) On a 4-sided sukkah, one corner must be left for last, This last corner will use the 2 short corner sections to join the last two panels together. These 2 short corner sections are to be slid in place, (instead of hooked) starting at the top of the last corner and sliding down. NOTE: You may need a step ladder to see that you are sliding the corner sections in properly. NOTE: If you have difficulty sliding this last corner into position, you can use any metal lubricant spray such as "WD-40".

5. TOP OF SUKKAH WOOD BEAM ASSEMBLY Place the pre-notched lumber beams on the top of the Sukkahm as shown in the illustration. NOW YOU CAN PUT ON THE SCHACH OR BAMBOO MAT AND YOUR SUKKAH IS COMPLETE.

FOR SUKKAHS LARGER THAN STANDARD SIZE Special Top Brace Clamp Brackets have been provided to give the walls greater rigidity and stability. Slide wood bars (that have also been provided) into position as shown in the illustration.

FOR SUKKAHS WITH ONLY 3 WALLS Attach the (2) Wall Support Brackets (that have been provided) to wall with screws. This can be a permanent installation. Slide Sukkah panel into bracket as shown in illustration.

< PREVIOUS